Master Automotive Electronic Faults Detector MST-101

Master Automotive Electronic Faults Detector MST-101: Toys & Games. Master Automotive Electronic Faults Detector MST-101: Toys & Games. The detector is using advanced technology from Germany, it can collect and analyze signals under non-dismantle automotive electrical parts, Testing results are showed by LED indicator and beeper. . Easy to know if there is faults of the automotive electronic parts. . It can be used for variety of detection: Coil (according to the traditional coil, double dingle, according to the coil); Generators, within the United Nations, combining the fan motor (heating and cooling water valve); MAITRISER valve, injector, according to the plug-in fuel, power, sensor transfer effect lobby. . Test Range: Ignition Coil(traditional coil,double spark coil,single spark coil) generator, fan,electric-magnetic valves,emission gas controlling value, fuel injectors,relay.etc. . Safe Operations. . 1. The car to be tested should park at an area with good air condition, can not suck into exhaust emission from engine.. 2. The car to be tested should be far away from smoke and fire source;The gasoline engine and chargeable battery is possible to occur explosive air, so it is very necessory to prepare fire extinguish gears accordingly.. 3. During test process, it is necessory to avoid the moving parts and heat source to protect tester and testing equipments.. . To be far away from the cooling fan of engine.. . Do not put other equipments on the battery which is possible to make the battery inside to be Short, which may cause hurt or damage of tester and equipments.. 6. Do to turn off the ignition switch before connecting or remove electrical parts.. 7. Do not leave the car during the test.. 8. Please confirm the gear position of the car: automatic is at P; manual is at blank; Do push tight of manual brake; put blocks before the driving tyres.. 9. Please read relative warnings from car manufacturer,pay attention to the important warning information.. . . Using Instructions. . 1) put the detector pen to the electric components to test, there will be corresponding voice signal and LED flashes to show the park if it is working fine.. 2) The 2 sides has different sensitivity of the top on the detector can test different electric lines.. 3) Hold the detector pen to the coil of the line to get precise testing results.. ) There are modes switch on the detector pen. LevelII is used for normal test, levelIII is used for strong magnetic field test.. . . Package including:. . 1pc x Automotive Electronic Faults Detector MST-101. . . .

Master Automotive Electronic Faults Detector MST-101
Master Automotive Electronic Faults Detector MST-101